No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Automatically Deploying Terminals

Automatically Deploying Terminals

When configuration files and version files and terminal numbers are prepared, you can use the automatic deployment function of the eSight to upgrade the configuration files and version files and allocate numbers when terminals are connected for the first time. This significantly improves deployment efficiency. By default, eSight manages IP phones in non-NAT mode. When eSight manages IP phones in NAT mode, it can only upgrade eSpace 79 and eSpace 89 series IP phones.

Prerequisites

Procedure

  1. Choose Resource > Collaboration > Collaboration Management > Terminal Device Management from the main menu.

  2. In the navigation tree on the left, choose Terminal Device Management > Deployment Management > Automatic Deployment.
  3. Click in the Associate Configuration File column of the group where the terminals to deploy are located, and select the configuration files for the terminal models to deploy.

    Default groups are displayed in the group list. You can click a group name to access the corresponding subgroups. In the subgroup list, you can click at the top to back to the previous group.

    For eSpace 7900 series and eSpace 8900 series IP phones, select the configuration files whose Configuring Policy is set to Full if the automatic number allocation function needs to be enabled. Otherwise, automatic number allocation is unavailable during automatic deployment.

  4. Optional: Click in the Associate Version File column and select the version files of the terminal models to deploy.
  5. Click in the Allocated Number Segment column and specify the number segment.

    The eSight does not automatically allocate numbers if no number segment is specified.

  6. Optional: Click in the Subnet Bandwidth column and set the maximum bandwidth that the terminals in the subnet can use during automatic deployment.

Result

Choose Resource > Collaboration > Collaboration Management > Terminal Device Management from the main menu. In the navigation tree on the left, choose Terminal Device Management > Deployment Management > Automatic Deployment, click Task View tab page and view the execution result of the automatic deployment task.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 311915

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next