No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Methods and Protocols Used for Adding eLTE Device

Methods and Protocols Used for Adding eLTE Device

Before connecting devices to the eSight, you need to learn about the methods of adding devices to the eSight.

Table 18-2 and Table 18-3 lists types of devices that can be connected to eSight, specific device names, and methods of adding the devices to eSight. Subnets can be created to manage Industry Terminals.

Table 18-2 Methods to add devices

Device/Application Type

Can Be Automatically Discovered? (Y/N)

Can Be Added in Batches? (Y/N)

Can Be Added One by One? (Y/N)

Industry Terminal

N

Y

Y

eNodeB

Y

Y

Y

eSE

N

Y

Y

eOMC

N

N

Y

Table 18-3 Used protocols

Device/Application Type

MML

TR069

NETCONF

SNMP

Industry Terminal

N

Y

N

N

eNodeB

Y

N

Y

N

eSE

Y

N

Y

Y(CGPOMU support only)

eOMC

N

N

N

Y

TR069 protocol based on HTTP/HTTPS protocol. Devices access the eSight using HTTPS protocol by default. If you use the HTTP protocol, it will bring some risks.

Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287151

Downloads: 550

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next