No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Virtual Resources Devices in Batches

Adding Virtual Resources Devices in Batches

You can batch import configuration files to batch the virtual resources devices and add those virtual resources devices to related subnets.


  • You have obtained the IP address, user name, and password of the device to be accessed.
  • The eSight service has been started.
  • Virtual Manager (FS/FC/vCenter/ESX) has been installed.


  1. On the menu bar, choose Resource > Common.
  2. In the navigation tree in the left pane, choose Add Resource > Import Resource.
  3. In the function pane, select Virtual Resources.
  4. In the Download template area, click the configuration file template.

    The File Download dialog box is displayed.

  5. Click Save to save the configuration file template locally.

    Ensure that the name of the uploaded configuration file is consistent with that of the configuration file template.

  6. In the configuration file template, enter discovery information about virtual resources devices that need to be batch imported and save the entered information as a configuration file.
  7. On the import device page, click next to Upload File and select the saved Excel file.
  8. Click Upload to upload the configuration file.

    After the configuration file is uploaded, the information about virtual resources devices that need to be batch imported is displayed.


    If an entry of information is incorrectly entered, this entry is dimmed, and the error information is displayed.

  9. Select the devices and click Create. The system starts discovering the selected virtual resources devices.


    If some virtual resources devices fail to be discovered, modify the information about those devices and import and discover them again.

Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 334605

Downloads: 667

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next