No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding GPON Devices

Adding GPON Devices

This topic describes how to add devices to the eSight to realize unified management.

Operation Procedure

Step

Operation

Description

1

Set protocol parameters on the device: SNMP.

For details, see 1.4.1.

2

Set protocol parameters on eSight: SNMP.

For details, see 1.4.2.

Protocol parameter values on eSight must be consistent with those on the device.

3

Add devices to eSight.

For details, see 1.4.3.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 333706

Downloads: 667

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next