No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Abnormal Communication of VMs

Abnormal Communication of VMs

When a service exception occurs, for example, network disconnection or data transmission discontinuity, you can locate fault causes using the detailed data on the VM resource management page.

Prerequisite

You have obtained the IP address and name of the VM where the service exception occurs.

Procedure

  1. Click the Search icon in the upper right corner and set search criteria, for example, the name of a VM.
  2. Select the VM you want to view and click it to access its resource manager.
  3. Choose General > Basic Information in the navigation area on the left. Then check and handle static configuration information of the VM.
  4. Choose General > Alarm List in the navigation area on the left. Then check and handle alarms related to the fault.
  5. Choose General > Physical Topology in the navigation area on the left. Then check and handle VM network connection problems.
  6. Choose Details > Component Topology in the navigation area on the left. Then check and handle VM performance statistics.

    Click in the upper left corner to modify performance counters you want to display in the topology.

    If the statistics of key performance counters such as memory usage, CPU usage, and disk read/write rate of the VM are incorrect, services running on the VM consumes excess CPU and memory resources. In this case, adjust services or expand the capacity of the VM.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 313457

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next