No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Function Overview

Function Overview

Zero Touch Provisioning (ZTP) improves the efficiency in device deployment, routine maintenance, and troubleshooting, and reduces labor costs.

Typical Scenario

Devices such as switches or routers need to be deployed on the live network. After the device plan is complete, the network administrator does not need to commission software of devices onsite. After unconfigured devices are powered on, they can automatically connect to specified management devices and load system files including the configuration file, system software package, and patch file. ZTP implements fast device deployment.

Function Overview

  • Topology plan deployment: provides capabilities including topology drawing, device file matching, topology plan error correction, and file delivery to deploy unconfigured devices.
  • Device identifier deployment: deploys unconfigured devices based on MAC addresses or ESNs by performing operations including device creation, file matching, deployment, and activation.
  • SMS message deployment: deploys unconfigured devices based on SMS messages by performing operations including device creation, deployment file matching, and SMS message sending.
  • Replacement of faulty devices: supports replacement of faulty devices based on the configuration file of faulty devices or ZTP template.

Principles

During ZTP deployment, the interaction process between eSight and the device is as follows:

  1. After the unconfigured device is powered on, it sends a request to the DHCP server to obtain eSight information.
  2. eSight communicates with the device, and the file server of eSight delivers files to the device.
  3. After the files are loaded and activated on the device, the deployment is complete.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287542

Downloads: 553

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next