No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing IoT Devices

Managing IoT Devices

eSight can manage NEs of the IoT device added to it in a centralized manner.


  1. Choose Resource > IoT from the main menu.

    Table 19-1 Description of the Device Management page



    1. Toolbar


    2. Device display information

    Displays basic information and operations of the IoT device.


    Device name.

    Connection Status

    Connection status of the device, which can be Offline or Online.

    IP Address

    Device IP address.

    Backup IP Address

    Device backup IP address.


    Subnet of a device.

    Device Type

    Device model.

    Software Version

    Device software version.


    You can perform the following operations: Locate in Topology, Modify, Delete, and Modify SNMP Information.

  2. You can perform the following operations on the Device Management page.



    Add IoT devices

    Add a single IoT device

    1. Click Add. The Add Device page is displayed.
    2. Set the IP address, Name, Subnet, Device type.
    3. Set the SNMP.

      The SNMP version is V3, you need to set Security name, Authentication protocol, Authentication password, Privacy protocol, Privacy password and Timeout interval.


      Contact the NE administrator for SNMP parameters.

    4. Click OK.

    Delete devices

    You can delete information about the IoT devices when eSight no longer manages these devices.


    After the IoT is deleted, its managed sub-NEs are automatically deleted.

    • Delete information about a single IoT device.
      1. Click next to the target device.
      2. Click Yes in the Confirm dialog box.
    • Delete information about multiple IoT device in a batch.
      1. Select devices you want to delete.
      2. Click Delete above the list.
      3. Click Yes in the Confirm dialog box.


    You can perform this operation to modify the subnet of the device.

    1. Select a device to be adjusted and click Move.
    2. Select the target device on the Move page and click OK.
    3. Click Yes in the Confirm dialog box.

    Locate in Topology

    Click next to the device list. The Topology Management page is displayed. For details on topology management operations, see Physical Topology Management.

    Modify Information

    You can perform this operation to modify device information.

    1. Click next to the target device. The page for modifying device information is displayed.
    2. Modify device information on the page that is displayed.
    3. Click OK.

    Modify SNMP Information

    1. Click in the Operation column of the target device.
    2. Modify SNMP information on the page that is displayed.
    3. Click OK.

Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 312530

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next