No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing Software Terminal Information

Managing Software Terminal Information

eSight allows you to preset and manage software terminal information and automatically add the software terminal to the corresponding terminal group.

Prerequisites

You have collected the User Account and Group Name of software terminals.

Importing Software Terminal Number Information

  1. Choose Resource > Collaboration > Collaboration Management > Terminal Device Management from the main menu.

  2. In the navigation tree on the left, choose Terminal Device Management > Resource Management > Terminal Number.
  3. Click Software Terminal tab page.
  4. Download the template and enter parameters following the template instructions, and save the settings.
  5. Click Import, select the configured template, and click OK.

    The newly added software terminals information is displayed on the interface.

Manually Adding Software Terminal Number Information

  1. Choose Resource > Collaboration > Collaboration Management > Terminal Device Management from the main menu.
  2. In the navigation tree on the left, choose Terminal Device Management > Resource Management > Terminal Number.
  3. Click Software Terminal tab page.
  4. Click Add and enter related information.
  5. Click OK.

    The newly added software terminal information is displayed on the interface.

Setting the Soft Terminal Authentication Mode

By default, eSight uses the uPortal to authenticate soft terminals. To authenticate soft terminals using the CloudPortal, you need to manually configure the CloudPortal authentication function. For details, see "Maintenance Reference > Configuration Files > Collaboration Management > ems_config_readWriter.properties" in the Maintenance Guide.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 311086

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next