No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Troubleshooting

Network Troubleshooting

When faults occur on a GPON network, eSight will report the faults through alarms. You can troubleshoot the faults based on the alarm information in a timely manner. In the case when you ignore the alarm reported by eSight, but receive a fault report from the end user, you are advised to rectify the fault from the user side to the network side according to the following procedure.

Context

Choose Fault > Current Alarms from the main menu to view the current alarms.

Procedure

  1. Monitor the ONU UNI. For details, see Monitoring ONU UNI.
  2. Monitor the ONU. For details, see Monitoring ONU.
  3. Monitor the connection between the ONU and OLT. For details, see Monitoring the Link Between ONU and OLT.
  4. Monitor the OLT. For details, see Monitoring OLT.
  5. Monitor the upstream port of the OLT. For details, see Monitoring OLT Uplink Interface.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287451

Downloads: 551

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next