No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Device Introduction

Device Introduction

The transport component supports the management of the PowerCube 500-T, ePMP 1000, RTN510 AP, and RTN510 RT devices. This section describes the purpose, feature, and positioning of the devices.

PowerCube 500-T

Huawei PowerCube 500-T hybrid power supply solution is widely used in safe city and smart city projects to provide power supply and support for video surveillance cameras and provide power supply and receiving space for data transmission devices. In addition, PowerCube 500-T can also provide power supply and support for devices such as the solar streetlight and hotspot coverage devices.

PowerCube 500-T supports mains and solar power supplies. Currently, it provides the solar, electrical hybrid, and photoelectric solutions, covering all scenarios with or without mains.

The PowerCube 500-T supports output voltages 12Vdc, 24Vac, 48Vdc, and 220Vac to power cameras and transmission devices such as small-capacity routers, PONs, CPEs, and APs.

For more documents about PowerCube 500-T, visit Huawei support websites:

Support website for carriers: Support > Product Support > Network Energy > Telecom_Energy > Hybrid_Power > Hybrid Power. > PowerCube 500

Support website for enterprises: Support > Network Energy > Hybrid Power > PowerCube 500

ePMP 1000

ePMP 1000 is a microwave product resold by Huawei to third parties. The main device is provided by Cambium Networks. The ePMP wireless broadband solution of Cambium Networks provides excellent service networks with the onsite HA verification and GPS synchronization activation functions in areas where network coverage is not realized or is insufficient. The network can be flexibly expanded as the application scope increases.

For more documents about ePMP 1000, visit Huawei support websites:

Support website for carriers: Support > Product Support > Network > Transmission Network > Microwave > Outsourcing Microwave Series > OptiX PMP 450

Support website for enterprises: Support > Documentation > Transport Network > Microwave > OptiX PMP 450


RTN510 is the first Sub 6G microwave transmission system of Huawei, including the PtP and PtMP system types. The following figure shows the core components of the PtP and PtMP.

The Sub 6G microwave solution uses the 4.9-5.8 GHz frequency band, which is a free-of-charge frequency band for most countries and regions. Except for some segmented subbands, most of subbands require no license. That is, free-of-charge frequency bands can be directly used.

AP: The total capacity can reach 600 Mbit/s and the capacity of each uplink or downlink can reach 540 Mbit/s.

RT: The total capacity can reach 100 Mbit/s and the capacity of each uplink or downlink can reach 100 Mbit/s.

A maximum of 32 RTs can be connected to an AP.

Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 314446

Downloads: 637

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next