No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Process for Connecting Servers to eSight

Process for Connecting Servers to eSight

This section describes the process for connecting servers to eSight for management.

Figure 9-2 shows the server management process.

Figure 9-2 Process for server management
Table 9-1 Process for server management

No.

Basic Operation

Description

Method

1

Obtain information for connecting the servers.

Obtain the IP addresses, access protocols, user names, and passwords from the servers to ensure that the parameters configured on eSight are consistent with those on the servers. Otherwise, the servers cannot be connected.

Contact the server administrator to obtain the information.

2

Know the server access protocol.

Know the access protocols, connection modes, and default parameters supported by different server types to improve efficiency.

Methods and Protocols Used for Adding Server Devices

3

(Optional) Set protocol parameters for the servers.

Set the protocol parameters for the servers so that they can communicate with eSight. If the servers use the default protocol parameters, you do not need to set the parameters.

Setting Server Protocol Parameters

4

Connect the servers.

Servers can connect to eSight in three modes: automatic discovery, single adding, and batch import for centralized manner.

5

Manage the servers.

On eSight, you can view the basic information, alarms, and health status of servers, and perform operations such as moving a server to a subnet, deleting a server, and modifying basic information.

Managing Server Device

Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287463

Downloads: 551

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next