No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN Service Configuration Management

WLAN Service Configuration Management

You can configure the WLAN service for ONU devices that have been deployed and gone online in eSight.


  • eSight is running properly.
  • An ONU has been added to eSight.


  1. Choose Resource > PON from the main menu.
  2. Choose PON Service > ONU Service Configuration from the navigation tree on the left.
  3. Click .
  4. Click to download the WLAN template.
  5. Open the profile, enter information, and save the file.

    • In the profile, the VLAN must be the same as the WLAN VLAN in the multi-service configuration profile created in eSight. Otherwise, the import fails.
    • SN imported must exist in list of ONU service configuration. Otherwise, importing would fail.

  6. On the Import tab page, click to select the saved profile.

    • In the Linux operating system, you need to enable the FTP service, see How to Enable the FTP Service.
    • SFTP is recommended because its security level is higher than that of FTP.

  7. Click Import. The import result of WLAN parameters is displayed in the list at the bottom of the tab page if imported successfully.


    A maximum of 4 WLAN service records can be saved for an ONU device. If there are more than 4 records on the device after the new profile is delivered, old records are overwritten.

  8. Click OK.
  9. In ONU Service Configuration tab, imported profile record of ONU will be added in ONU list.

Related Operations

Table 17-16 Related operations of ONU Service Configuration page

Related Operations


Imports the WLAN parameter setting profile.


After the profile is imported successfully, a deployment task is automatically generated and executed to deliver parameters to the devices.

Sets WLAN service parameters on the ONU.

Delivers the WLAN service parameters to the ONU.

Verifies the consistency between the profile on eSight and profile on the device.

Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 311543

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next