No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Protocol Parameters

Configuring Protocol Parameters

To enable devices to be loaded to the eSight by the automatic discovery function, configure the eSight access parameters.

Prerequisite

You have the user name and password of the ESX server.

Context

The access parameters are required for the communication between the eSight and ESX server. If the user name or password of the ESX server changes, synchronize the user name or password of the eSight with that of the ESX server to ensure normal communication.

Procedure

  1. Go to the ESX Server page.

    1. Choose Resource > Virtual Resources.
    2. In the navigation tree, choose ESX Server.
    3. In the function pane, click the name of the device whose information you want to query.

  2. In the left navigation tree, choose Settings > SOAP Protocol Parameters.
  3. Enter the new username and password.
  4. Click Test when the configuration is successful.
  5. Click Apply when the test is successful.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 284313

Downloads: 544

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next