No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Report System

Configuring the Report System

You can configure the report system. Specifically, you can configure the threshold of the report system area. This offers a prewarning for insufficient disk space and prevents insufficient space of the report system area. You can also configure logos for customers so the reports can displays their logos.

Prerequisites

  • You have logged in to the eSight Infrastructure Manager client by web browser.
  • You are authorized to use View Infrastructure Right.
    The operation right consist of all operation rights for the following function menus:
    • Resource > Infrastructure > Monitor
    • Resource > Infrastructure > Alarm
    • Resource > Infrastructure > Business
    • Resource > Infrastructure > Analysis
    • Resource > Infrastructure > Configuration > Configuration Management > Access Control Management
    • Resource > Infrastructure > Configuration > Configuration Management > Device Software Management
    • Resource > Infrastructure > Configuration > Autocontrol > Autocontrol Strategy
    • Resource > Infrastructure > System

Procedure

  1. Choose Resource > Infrastructure > Analysis > Custom Report > Report System Config from the main menu. The Report System Config window is displayed.
  2. In the navigation tree on the left, choose Reports Disk Usage. In the pane on the right, set the maximum value of the storage area and click Save.

    You can view the usage of the storage area on the lower part of the window.

  3. In the navigation tree on the left, choose Customer Information. In the pane on the right, click to select the customer logo and click Upload.

    NOTE:

    The figure can be supported only in .jpeg, .gif, .bmp and .png format.

    If you wish to replace an uploaded picture, select a new one and upload it.

Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 283220

Downloads: 540

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next