No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Industry Terminal Upgrade Management

Industry Terminal Upgrade Management

You can upgrade a Industry Terminal to a later version or roll back a Industry Terminal to an earlier version.

Prerequisites

  • You have logged in to the eSight client.
  • The firmware version files for Industry Terminals has been created in eSight.
  • You have been assigned the operation rights.

Procedure

  1. Choose Resource > eLTE > Device Software Management > Industry Terminal Upgrade Management from the main menu.
  2. Click to create a task.

    1. Set Task Name in Task Set.
    2. Set Scheduled Task.
      • If you set Scheduled Task to ON, set Scheduled Time manually.
      • If you set Scheduled Task to OFF, eSight performs the upgrade task immediately.
    3. Set Same Version Upgrade.
      • If you set to OFF, eSight will not perform the upgrade task when the target version is the same as the current version of the Industry Terminal.
      • If you set to ON, eSight performs the upgrade task when the target version is the same as the current version of the Industry Terminal.

  3. Select devices.

    1. Click and select a managed object on the page that is displayed.
    2. Click OK.

      Device models and version are automatically displayed in the Select File area.

  4. Set Target Version/File in the list under the Select File.
  5. Click OK.

Follow-up Procedure

When the upgrade task is created, you can perform the following operations on the Industry Terminal Upgrade Management page.

Task

Operator

Query task

You can perform this operation to check whether a Industry Terminal is upgraded.

  1. Specify the search criteria, including Task Name, Task Creation Mode, and Task Status.
  2. Click Search. Upgrade information about the queried task is displayed on the current page.

Stop task

You can perform this operation to stop upgrade tasks.

  • Stop a single task.
    1. Click next to the target task.
    2. Click Yes in the Confirm dialog box.
  • Stop multiple tasks in a batch.
    1. Select the tasks you want to stop.
    2. Click.
    3. Click Yes in the Confirm dialog box.

Retry task

If version upgrade tasks fail, you can perform this operation to restart the version upgrade tasks.

  • Retry a single task.
    1. Click next to the target task to retry the upgrade.
    2. Click Yes in the Confirm dialog box.
  • Retry multiple tasks in a batch.
    1. Select the tasks you want to retry.
    2. Click.
    3. Click Yes in the Confirm dialog box.

Save task

You can perform this operation to remove and save upgrade task information before clearing it.

  • Save a single upgrade task.
    1. Click next to the target task.
    2. Click Yes in the Confirm dialog box.
  • Save upgrade tasks in a batch.
    1. Select upgrade tasks you want to save.
    2. Click History above the task list.
    3. Click Yes in the Confirm dialog box.

Export task

You can perform this operation to export upgrade tasks.

  1. Click next to the target task.
  2. Select a path for saving the upgrade task and click Save.
Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 309738

Downloads: 633

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next