No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios

Application Scenarios

eSight supports the following application scenarios of the IPSec VPN: Site-to-Site VPN and Hub-Spoke VPN.

Site-to-Site VPN

Site-to-Site VPN is also called LAN to LAN VPN or Gateway to Gateway VPN. It is used to implement communication between LANs. Figure 12-58 shows the typical networking.


In this scenario, the IPSec service discovery does not support the intelligent route selection mode.

Figure 12-58 Networking diagram of Site-to-Site VPN

Hub-Spoke VPN

In practice, Hub-Spoke VPN enables multiple branches of an enterprise to connect to the headquarters. Figure 12-59 shows the typical networking.

Figure 12-59 Networking diagram of Hub-Spoke VPN
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 335729

Downloads: 671

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next