No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Precautions

Precautions

License Support

Basic functions and features are not controlled by the license.

Component Dependency

The QoS management depends on the SLA&QoS management component.

Protocol Support

SNMP read parameters need to be set on the device and eSight.

Device Support

For details, see the Specification List.

Version Support

For details, see the Specification List.

Application Scenario

The QoS function uses the CBQoS that applies to the periodic collection interface or VLAN to collect statistics and displays data including historical data charts and alarms to users so that users can properly deploy the QoS policy based on the quantitative network QoS data.

Feature Limitation and Dependency

  • Only the CBQoS that applies to the interface and VLAN are supported, but the global CBQoS is not supported.
  • Only the CAR, GTS, WRED, and queue can be configured for the CBQoS that applies to the interface.
  • Only the CAR, GTS, and queue can be configured for the CBQoS that applies to the VLAN.
  • When collecting performance data through QoS, ensure that the traffic statistics function is enabled in the traffic policy or traffic behavior of the device. The command for enabling the function is statistics enable.
  • In versions later than V8, the NE series does not support the display of the matching rules of QoS traffic classification on eSight.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287159

Downloads: 550

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next