No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Restrictions

Application Restrictions

  • Resource management

    If eSight V300R009C00SPC200 or a later version is used with SoftVCN/VCN30X0/VCN5X0/CloudVCN V100R003C00SPC200 or a later version, ensure that the time is the same for the two versions. Otherwise, the status of the front-end device may be incorrect.

  • Alarm capability

    The maximum number of current alarms can be 100000 only when eSight is deployed on a large-scale management configuration server.

  • Camera packet loss diagnosis

    This function is based on the layer-3 network and requires an agile switch supporting the IPCA capability between the IPC and VCN.

Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 314672

Downloads: 637

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next