No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting SNMP Parameters on eSight

Setting SNMP Parameters on eSight

This topic describes how to set SNMP parameters so that NEs and eSight can communicate properly. You can use templates to set SNMP parameters for multiple NEs at a time.

Prerequisites

SNMP parameters have been correctly set on NEs.

Procedure

  1. Choose Resource > Common from the main menu.
  2. Choose Add Resource > Protocol Template > SNMP Template from the navigation tree on the left.
  3. Click Create and set template parameters on the displayed page.

    • SNMP v3

    • SNMP v2c

    • SNMP v1

    NOTE:
    • The SNMP parameter settings on eSight must be the same as those on NEs.
    • Using SNMP v3 is recommended because of its higher security than SNMP v1 and SNMP v2c.
    Table 17-1 SNMP Parameters on eSight and devices

    SNMP parameters on eSight

    The corresponding SNMP parameters on devices

    Authentication password

    Authentication password.

    Privacy protocol

    User encryption mode.

  4. Click OK.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287760

Downloads: 554

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next