No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section describes precautions on using the smart configuration tool function so that eSight can be used properly.

License Support

Basic functions and features are not controlled by licenses.

Component Dependency

The intelligent configuration tool depends on the Network Device Management Component.

Protocol Support

SNMP and STelnet/Telnet are required.

Device Support

For details, see the Specification List.

Version Support

For details, see the Specification List.

Application Scenario

Commands need to be delivered to devices in batches.

Feature Limitation and Dependency

  • It is time-consuming to provision a large amount of device configuration data. Therefore, execute the provisioning task during off-peak hours to avoid affecting network services.
  • To improve the success rate of configuration data provisioning, disable the function of sending logs from devices to the console.
  • Do not deliver the reboot command. If a device is restarted, eSight will be unable to check whether the command is delivered successfully.
  • When using the intelligent configuration tool to edit a command to be delivered, take the view where the command is located. For example, the quit command cannot be delivered in the system view.
  • Some user interaction commands are automatically delivered by eSight protocol stacks, and cannot be delivered by users again. These commands can be viewed under System > System Management > Customize Device > Management Capability > Telnet Customization.
  • The intelligent configuration tool supports a maximum of 800 templates and directories in total.
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 334366

Downloads: 667

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next