No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operation Procedure

Operation Procedure

This section describes the detailed operation process of performance management.

Table 6-1 Performance management operations

Step

Operation

Description

1

Set protocol parameters on the device: SNMP and NETCONF

SNMP parameters are used to add devices to eSight. NETCONF is used to collect VXLAN tunnel packet information. Set different protocol parameters based on the site requirements.

2

(Optional) Enable the VXLAN tunnel packet statistics function on the device.

Users can use eSight to collect and view VXLAN tunnel packet information only after the VXLAN tunnel packet statistics function on the device supporting VXLAN.

3

Add devices to eSight.

Select a proper device addition mode based on the site requirements.

For details about how to add devices to eSight, see Adding Devices to eSight.

4

Set NETCONF parameters on eSight.

VXLAN tunnel packet information is synchronized to eSight through NETCONF. To facilitate subsequent operations, you need to set NETCONF parameters on eSight.

For details about how to set NETCONF parameters on eSight, see Setting Netconf Parameters on eSight.

NOTE:

NETCONF parameter settings on eSight must be the same as those on the device.

When devices use the same NETCONF parameters, you can create a NETCONF template to set NETCONF parameters for these devices in batches.

5

Create a performance task.

By default, eSight provides a performance data collection task to improve O&M efficiency. If the task does not meet performance data collection needs, you can create tasks based on site requirements.

6

View performance data.

You can view performance data and graphic performance trend views of resources. The performance data provides a basis for network optimization, which facilitates network O&M personnel in taking timely measures to avoid latent faults.

7

Customize a performance monitoring portlet.

You can save a historical performance view that concerns you as a home page portlet, which facilitates you in monitoring historical performance on the home page.

Translation
Download
Updated: 2019-08-10

Document ID: EDOC1100011877

Views: 298983

Downloads: 616

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next