No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why eSE Alarms Cannot Be Synchronized

Why eSE Alarms Cannot Be Synchronized

Question

Why eSE Alarms Cannot Be Synchronized?

Answer

eSight can synchronize alarms from devices to eSight.

eSE alarms are synchronized through SNMP. If eSE alarms cannot be synchronized, the security name, authentication key, or private key may be incorrect, or the SNMP timeout interval may be set to a short period.

In this case, access the device list and perform the following operations:

1. Check the security name, authentication key, or private key, and modify it if it is incorrect.

2. Check the SNMP timeout interval and modify it if it is too short.

NOTE:

SNMP supports only the CGPOMU device type.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 312610

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next