No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Default Subnet

Creating a Default Subnet

Divide a large network to several small networks based on a specific principle such as by region or device type to simplify network management. On the eSight, the small networks are called subnets. The eSight allows you to plan and create subnets before adding devices. Then you can add and manage devices by subnets.

Prerequisites

You have the resource operation rights.

Context

  • You can create lower-level subnets in a subnet.
  • You can move devices to a newly created subnet.
  • It is recommended that a subnet consist of a maximum of 10 layers to prevent performance problems.
  • It is recommended that a subnet contain a maximum of 500 devices.

Procedure

  1. Choose Resource > Common from the main menu.
  2. Choose Add Resource > Add Subnet from the navigation tree on the left.
  3. Set Subnet name and Description, choose Parent object, on the Default Subnet page.
  4. Click OK.

    NOTE:

    If the subnet is created successfully, it is displayed in the Subnet list.

Follow-up Procedure

After subnets are created, the Choose Resource > Common from the main menu. In the navigation tree on the left, select Resource Group > Subnet. allows you to perform the operations listed in the following table on the Subnet page.

Task

Procedure

View subnet information

On the eSight, you can view subnet information.

  1. In the Subnet page, set search criteria and click Search.
  2. Click the name of the subnet. The eSight displays all information about the subnet.

Modify subnet information

On the eSight, you can modify the attributes of a subnet, such as the subnet name.

  1. In the managed object list on the right of the Subnet page, click in the Operation column where the target subnet is located.
  2. On the page for modifying subnet information, modify the configuration parameters of the subnet.
  3. Then click OK.

Delete a subnet

You can delete the subnets that will not be managed by the eSight.

  1. In the managed object list on the right of the Subnet page, delete subnets.

    To delete a subnet, click in the Operation column where the subnet is located.

    NOTE:

    If there are devices or subnets under a subnet, you cannot delete the subnet.

  2. In the Confirm dialog box, click Yes.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287210

Downloads: 551

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next