No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Precautions

Precautions

This section describes precautions on using the device software management function so that eSight can be used properly.

License Support

Basic functions and features are not controlled by licenses.

Component Dependency

The device software management depends on the Network Device Management Component.

Protocol Support

SNMP, STelnet/Telnet, and SFTP/FTP are required and some devices need to use the NetConf protocol.

Device Support

Most Huawei devices are supported. For details, see the Specification List.

Version Support

For details, see the Specification List.

Application Scenario

Batch upgrade and management of devices.

Feature Limitation and Dependency

  • Version upgrade management
    • When adding a device to eSight, correctly configure SNMP and Telnet/STelnet parameters to ensure the FTP/SFTP connectivity. By default, files are transferred through SFTP. To transfer files through FTP, ensure that the corresponding service has been enabled.
    • During the device software upgrade, the device may restart. You need to choose a proper time to avoid affecting the normal network service.
    • Obtain the formal target version file from Huawei Support website. Verify that the file is correct. Do not change the file name so that the upgrade can be normally performed. For detailed upgrade precautions, see the device documents.
    • Ensure that the devices to be upgraded have sufficient storage space to load the upgrade files. If the storage space is insufficient, follow instructions in the product documentation of the corresponding device to release the storage space.
    • eSight regards patches whose names contain SPC/CP as cold patches. Devices will be restarted during the upgrade.
    • Before installing a patch, ensure that the patch matches the device software version. If they do not match, the upgrade will fail.
    • If configuration files need to be converted after the device is upgraded to the target version, eSight cannot be upgraded to the target version.
    • When the CE device adopts In-Service Software Upgrade (ISSU), take the precautions on the device networking, feature limitations, and version support to ensure that the ISSU upgrade check is passed. Obtain the target version by referring to the upgrade guide.
    • The SVF AS and FitAP devices do not support restart policy selection. They will automatically restart during the upgrade.
    • To upgrade FatAP V200R009C00SPC200 and later versions using the FTP mode, you need to set oms.ftpServer.ftps.isResetOffset in the AppBase/sysagent/etc/sysconf/svcbase/med_node_1_svc.xml file to false and restart eSight.
  • Signature Database Upgrade Management
    • The upgrade of the signature database occupies network resources. You need to choose a proper time to avoid affecting the normal network service.
    • The signature databases of the AC, AR, and firewall devices can be upgraded. For details about the supported device models and versions, see the Specification List.
    • Before upgrading a signature database, add a device to eSight and correctly configure the SNMP and STelnet/Telnet parameters.
  • License Management
    • The license management for firewall devices is supported. For details about the supported device models and versions, see the Specification List.
    • Before license management, add a device to eSight and correctly configure the SNMP and NetConf parameters.
Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 310544

Downloads: 633

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next