No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DSP Resource Statistics

DSP Resource Statistics

Digital Signal Processor (DSP) is a micro processor that is dedicated to processing digital signals in real time. DSP Resource Statistics helps you directly learn about IP PBX device DSP resource usage in real time.


  1. Choose Resource > Collaboration > Collaboration Management > Network Element Device Management from the main menu. In the navigation tree, choose Network Element Device Management > Unified Communications > Data Diagnosis > IP PBX Resource Statistics.

  2. Click the DSP Resource Statistics tab.
  3. Add a monitoring view.

    1. Choose Monitoring Settings from the navigation tree on the left and click Add.

      The Add View page is displayed.

    2. Enter the monitoring view name in View Name and click Select next to Select Area, select the object to monitor, and click OK.

      The system returns to the Add View page.

    3. Click OK.

      The added monitoring view is displayed.

  4. To view DSP resource usage, choose Monitoring View from the navigation tree on the left and expand the monitoring view whose data you want to view.
  5. To view historical DSP resource data, choose Historical Data from the navigation tree on the left, select the monitoring view that you want to view from Monitored Object, set Time Range, and click Search.
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 331020

Downloads: 660

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next