No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Remote OLT Upgrade

Configuring Remote OLT Upgrade

eSight provides a wizard-based device software upgrade function. You can follow the wizard to upgrade OLT versions or install patches in batches.


  • The OLTs have been added to eSight.
  • The OLTs are online.


  1. Choose Resource > PON from the main menu.
  2. (Optional) Upload a version file.

    1. Choose Device Software Management > File from the navigation tree on the left. Click .
    2. On the File page, set the version information and upload the version or patch file.

    3. Click Confirm.

  3. Choose Device Software Management > Upgrade Task from the navigation tree on the left and click .
  4. On the Create Task tab, set related parameters and set Category to OLT.


    SFTP is recommended because its security level is higher than that of FTP.

  5. Click Next.
  6. On the Choose Device tab page, click to select required devices.

  7. Click Next.
  8. On the Target Version/File tab, select or upload the version or patch file.

  9. Click Create.
  10. On the Result Confirmation tab, check the creation result of the upgrade task.

  11. In the Check Result column of the Device List area, check whether an upgrade task is created. If an upgrade task is created successfully, click Finished.


    If you want to create other upgrade tasks, click Continue Create.

Related Operations

Table 17-17 Operations related to upgrade task management

Related Operations


Deletes the selected tasks in batches.

Re-delivers upgrade tasks in batches to devices that fail to be upgraded.

Modifies related information about the task.

Deletes the task.

Re-delivers the upgrade task to the device that fails to be upgraded.

Downloads and checks related information about the task.


If a version file is used by an upgrade task, the file cannot be modified or deleted.

Table 17-18 Operations related to File

Related Operations


Deletes the selected version files in batches.

Modifies related information about the version file.

Checks the reference relationship between the version file and the device.

Deletes the version file.

Follow-up Procedure

  • Checks the execution result of the upgrade task.

    On the Upgrade Task page, click the name of the upgrade task to view detailed information of the task and the execution result.

    • You can view the upgrade status of each device in the Upgrade Status column. If the upgrade fails, view the failure causes in the Failure Reason column.
    • If you want to re-deliver an upgrade task to a device that fails to be upgraded, select the device and click . You can also click in the Operation column of the device that fails to be upgraded.
  • If the total version file size managed in device software upgrade exceeds the upper limit of the capacity, delete unnecessary version files in File or expand the upper limit of the capacity in Storage Settings.
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 316056

Downloads: 639

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next