No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Third-party System Integration

Configuring the Third-party System Integration

The Third-party System Integration uses value-added features provided by underlying storage systems to implement remote replication for mission-critical data of common applications running on application servers, the system is used in data protection and third-party system integration system. On the eSight, you can go to Third-party System Integration page.

Prerequisites

The user is a member of the administrator group.

Context

After installing the ReplicationDirector, configure parameters for it according to the following procedure. You can access the ReplicationDirector interface from eSight without logging in to the ReplicationDirector, and then perform information maintenance. If the ReplicationDirector is not installed, you do not need to perform the following procedure. The eSight supports only the following ReplicationDirector versions:

  • ReplicationDirector V100R003C00 (Clients of this version support only Internet Explorer.)
  • ReplicationDirector V100R003C10

Procedure

  1. On the menu bar, choose Resource > Storage Subnet.

  2. Choose Configuration > Third-party System Integration.
  3. Click Add, set the device parameters in the Add Third-party System Access Address dialog. Table 10-28 describes related parameters.

    Table 10-28 Access parameters

    Parameter

    Description

    Setting

    Name

    Set the name of the third-party system integration system.

    NOTE:

    The name is a string of 1 to 128 characters.

    [Example]

    storageA

    IP Address

    Indicates the IP address of the third-party system integration system.

    [Value range]

    • From left to right, the value of the first byte ranges from 1 to 255.
    • The values of the other bytes range from 0 to 255.

    [Example]

    10.10.10.70

    Port

    Port number used for access a specific third-party system integration system.

    [Value range]

    The value ranges from 1 to 65535.

    [Example]

    6553

  4. Click OK.

    NOTE:
    • Click Management, the Third-party System Integration page is opened.
    • Click to modify the device information.
    • Click to delete the device information.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 312067

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next