No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Automatically Discovering Transport Devices

Automatically Discovering Transport Devices

Transport devices can be automatically transport by searching for a network segment, which improves the efficiency for creating a large number of transport devices in batches.

Prerequisites

  • The device has been installed and powered on.
  • The SNMP protocol configuration has been completed for the device. For details, see the device documentation.
  • You have obtained the network segment where the device is located, SNMP protocol port number, device account, authentication password, and encryption password.

Procedure

  1. Go to the resource adding page and choose Resource > Common from the menu bar.
  2. (Optional) Choose Add Resource > Add Subnet in the navigation tree on the left and add a subnet.

  3. Choose Add Resource > Protocol Template > SNMP Template in the navigation tree on the left, click Create, and set parameters as prompted to configure a protocol template.

    NOTE:

    Transport devices support only the SNMP protocol.

  4. Choose Add Resource > Automatic Discovery in the navigation tree on the left and complete automatic discovery and creation of devices as prompted.

    NOTE:

    Transport devices support only two automatic discovery modes: By network segment (basic) and By network segment (advanced).

Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 286436

Downloads: 550

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next