No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the File Server Parameter

Configuring the File Server Parameter

eSight provides file server parameter configuration. You can use it to achieve the file transfer between the eSight and terminal devices.

Procedure

  1. Choose Resource > Collaboration > Collaboration Management > Terminal Device Management from the main menu.

  2. In the navigation tree on the left, choose Terminal Device Management > System Configuration.
  3. Under File Server Parameter Configuration, set File server address and File server port.

    NOTE:
    • File server address is the southbound floating IP address of eSight.
    • The default value of File server port is 38444.

  4. Click OK and click OK in the dialog box that is displayed.
Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 332104

Downloads: 662

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next