No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing ONUs

Managing ONUs

This topic describes how to view information about ONUs.

Prerequisites

  • eSight is running properly.
  • An ONU has been added to eSight.

Procedure

  • Querying all the ONUs
    1. Choose Resource > PON from the main menu.
    2. Choose PON Resource > ONU from the navigation tree on the left.
    3. (Optional) Set SN, OLT Name, OLT IP, PON Port, ONU Name, ONU IP, Run Status, Operate Status, Config Status, Software Version and click Search to search for desired ONUs.
    4. View the ONU running status, operation status, configuration status, ONU name, ONU IP address, terminal type, ONU alias, OLT name, OLT IP address, ONU ID, serial number, and software version in the list.

    5. Click the ONU Name of a record. In the overview tab page of the NE Explorer, view details about the ONU, including the basic information, optical module temperature, optical module bias current, power voltage of the optical module, transmission power of the optical module, uplink FEC decoding uncorrected blocks, DOWI alarms, LOFI alarms, uplink FEC decoding corrected blocks, BIP error frames, rate, and UNI port.

  • Querying and configuring POE parameters of Ethernet ports of an ONU
    1. Choose Resource > PON from the main menu.
    2. Choose PON Resource > ONU from the navigation tree on the left.
    3. In the ONU list, click the Name of a record to enter the ONU NE Explorer.
    4. Choose ONU Management >Ethernet Port Management from the navigation tree on the left.
    5. View details about the Ethernet port list, including Port ID, Name and Type.
    6. Click next to a port record to set parameters such as Switch, Mode, priority, and Max Power Class.
    7. (Optional) Click next to a port record to view extended information about the port.
    8. Click Confirm to deliver configured parameters to the device.

  • Viewing and configuring the ONU under the specified OLT
    1. Choose Resource > PON from the main menu.
    2. Choose PON Resource > ONU from the navigation tree on the left.
    3. Optional: Set OLT Name, OLT IP, Device Type or Device Status and click Search to find the desired OLT.
    4. In the OLT list, click the Name of a record. In the OLT NE Explorer, choose Device Config > ONU Manager from the navigation tree on the left.
    5. Optional: Set Name, Alias, Run Status, Operation Status, and click Search to search for desired ONUs.
    6. View the ONU running status, operation status, configuration status, frame ID, slot ID, port number, ONU ID, ONU name, ONU alias, vendor, terminal type, and SN in the list.

Related Operations

Table 17-5 Operations on the PON resource page of the ONU list

Related Operations

Purpose

To set the polling interval of ONU status and ONU UNI port status.

To modify the ONU alias, multiservice profile or description.

NOTE:

Replacing multiservice profile of ONU will interrupt services.

To move the ONU to the next optical splitter.

Replaces the faulty ONU.

Click OLT Name.

To view details about the OLT to which the ONU is connected.

Click Port ID.

To view information about the PON port on which the ONU resides.

Delete ONU.

NOTE:

Deleting ONU would fail if OLT is offline or faulty.

Export Selected

Export details of selected ONU to an .xls file.

Export All

Export details of all ONUs to an .xls file.

Import device information to add an ONU on eSight manually.

Import ONU aliases in batches.

Table 17-6 Operations on the ONU management page of the OLT NE manager

Related Operations

Purpose

Synchronize

To synchronize the ONU information.

Activate

To activate an ONU that is in the deactivated state to recover the working status of the ONU.

Deactivate

To deactivate an ONU. After the ONU is deactivated, it stops working and the services on the ONU are interrupted.

To modify the alias of the ONU.

To view the ONU performance data on the Performance Data tab.

Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 285751

Downloads: 550

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next