No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Backing Up Data

Backing Up Data

You are advised to regularly back up configuration data of Secure Center. When Secure Center fails to work properly due to misoperations or other faults, you can use backup data to restore security policies. eSight supports automatic backup and immediate backup.

  • Automatic backup

    To guarantee security of Secure Center, you need to back up security policy data regularly. The backup data can be used to restore security policy data to the state before the backup in cases of exceptions due to misoperations or other faults.

    After a scheduled backup policy is configured, the system backs up Security Center data at regular intervals.

  • Immediate backup

    After the deployment or during the maintenance, administrators usually need to start immediate backup on configuration data of Secure Center before they change or delete the data. The backup data can be used to restore security policy data to the state before the backup in cases of exceptions caused by improper configuration or other faults.

    After an immediate backup task is configured, the system backs up Security Center data immediately.

Automatic Backup

  1. Choose Resource > Network > Security Business > Secure Center from the main menu.

  2. Choose Monitoring and O&M > Revision from the navigation tree on the left. Click and set automatic backup parameters. The system backs up data based on the configured period.

Immediate Backup

  1. Choose Resource > Network > Security Business > Secure Center from the main menu.

  2. Choose Monitoring and O&M > Revision from the navigation tree on the left. Click and set immediate backup task parameters.
  3. Click OK to execute data backup immediately.
Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 315526

Downloads: 637

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next