No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Industry Terminal Version Management

Industry Terminal Version Management

This topic describes how to manage the Industry Terminal firmware version files.


  • You have logged in to the client.
  • You have obtained the latest firmware version file of the Industry Terminals.
  • You have been assigned the operation rights.


  1. Choose Resource > eLTE > Device Software Management > Industry Terminal Version Management from the main menu.
  2. Click. On the page that is displayed, upload the version file and set version parameters..

    1. Click after the Firmware version file and select the version file.

      By default, the maximum number of uploaded industry terminal version files is 200.

    2. Optional: Click after the Signature file and select the signature file.
    3. Set PNP default firmware version.

      If the default firmware version of the product model exists on eSight and you have enabled PNP default firmware version, a confirm dialog box is displayed. To make the current firmware version become the new default firmware version, click Yes.

    4. Set Remark.
    5. Click OK.

  3. Click OK in the dialog box that is displayed.


    If the Version Information Confirm window is displayed during the upload, confirm and modify Device Model, and set Hardware Version and Firmware Version according to the reality. When the parameters are verified, click OK.

Follow-up Procedure

After the version file is uploaded, you can perform operations listed in the following table on the Industry Terminal Version Management page.




Modifying information

Allows you to modify the version file information:

  1. Click in the Operation column for a desired firmware version file.
  2. On the page that is displayed, modify the version information and upload the version file.
    • In an old firmware version file, you can modify the following parameters: Device Model, Hardware Version, Firmware Version, PNP default firmware version, and Remark.
    • In a new firmware version file, you can modify PNP default firmware version and Remark.
  3. Click OK.

You cannot delete or modify a firmware version that is being used.

Deleting information

Allows you to delete the version file(s):

  • For a single firmware version file
    1. Click in the Operation column for the desired firmware version file.
    2. In the Confirm dialog box, click Yes.
  • For multiple firmware version files
    1. In the firmware version list, select the firmware version files to delete.
    2. Click in the upper part of the list.
    3. In the Confirm dialog box, click Yes.
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 336408

Downloads: 680

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next