No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section describes precautions on using the terminal resource management function so that eSight can be used properly.

License Support

Basic functions and features are not controlled by the license.

Component Dependency

The terminal resource management depends on the Network Device Management Component.

Protocol Support

SNMP and SFTP are required.

Device Support

Except for firewall devices, most Huawei devices, H3C devices, and Cisco devices are supported. For details, see Specification List.

Version Support

For detail, see the Specification List.

Application Scenario

Uniformly managing terminal resources, intelligently detecting illegal terminals, and rapidly checking terminal faults.

Feature Limitation and Dependency

  • Automatic terminal discovery function: It is recommended that the discovery period be greater than 30 minutes if the number of devices to be discovered is less than 2,000 and be greater than 60 minutes if the number of devices to be discovered is greater than 2,000. Set the discovery period based on the actual number of devices and the network condition, ensuring that terminals can be discovered normally.
  • If the device is configured with port security and the sticky MAC function is enabled on the interface, the access terminals connected to the interface cannot be discovered.
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 337201

Downloads: 682

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next