SmartLogger2000 User Manual
This document describes the SmartLogger2000-10/10-B/11-B/10-C/11-C in terms of installation, cable connections, system operation and maintenance, and troubleshooting.
About This Document
Overview
This document introduces the SmartLogger2000 (SmartLogger for short) in terms of installation, electrical connections, system operation, maintenance, and troubleshooting. You should understand the SmartLogger features, functions, and safety precautions provided in this document before installing and operating the SmartLogger.
The figures provided in this document are for reference only. The actual product appearance may vary.
You can print the document. Store the paper copies properly for future use.
Intended Audience
This document is intended for photovoltaic (PV) plant operators and qualified electrical technical personnel.
Symbol Conventions
Symbol |
Description |
|---|---|
|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 09 (2021-02-15)
Updated Upgrading the Application.
Updated Upgrading the BSP.
Updated Technical Specifications.
Issue 08 (2020-03-30)
Updated Preparations and WebUI Login.
Updated Exporting Data.
Issue 07 (2019-12-20)
Updated WebUI Menu.
Updated Setting Modbus TCP Parameters.
Updated Setting IEC104 Parameters.
Updated Setting FTP Parameters.
Issue 06 (2019-07-30)
Updated WebUI Menu.
Updated Performing Deployment Wizard.
Updated Setting Running Parameters (Advanced User).
Updated EMI.
Updated Setting Power Meter Parameters.
Updated Alarm Output.
Added Setting Smart Tracking Algorithm Parameters.
Updated Managing the License.
Updated Active Power Control.
Updated Reactive Power Adjustment.
Updated Setting Export Limitation Parameters.
Added Setting Smart Reactive Power Compensation Parameters.
Issue 05 (2018-10-20)
Updated WebUI Menu.
Added Performing Deployment Wizard.
Updated Setting Running Parameters (Advanced User).
Updated Setting Running Parameters (Special User).
Added PID-PVBOX.
Added PID-SSC.
Added Smart Transformer Station (STS).
Updated Setting Management System Parameters.
Updated Setting IEC104 Parameters.
Updated Setting FTP Parameters.
Updated Setting Email Parameters.
Updated Upgrading Firmware.
Updated Data Re-collection.
Updated DI Active Scheduling.
Added PF-U Characteristic Curve.
Added Dry Contact Remote Control (Q/S).
Issue 04 (2018-04-10)
Updated Introduction to WebUI.
Updated Setting Management System Parameters.
Updated Setting FTP Parameters.
Updated Product Information.
Updated Setting Export Limitation Parameters.
Issue 03 (2018-03-15)
Updated Introduction to WebUI.
Updated Setting Running Parameters (Advanced User).
Updated Setting Running Parameters (Special User).
Added Setting the Name of the Built-in Bluetooth Module.
Updated Setting RS485 Parameters.
Updated Setting Power Meter Parameters.
Added Setting Export Limitation Parameters.
Updated Clearing Alarms.
Added Power Factor Closed-loop Control.
Issue 02 (2017-11-10)
Updated Introduction to WebUI.
Updated WebUI Menu.
Updated Setting Running Parameters (Advanced User).
Updated Setting Running Parameters (Special User).
Added Alarm Output.
Issue 01 (2017-07-20)
This issue is the first official release.