No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


License Usage Guide

HUAWEI USG6000, USG9500, NGFW Module

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rolling Back a License

Rolling Back a License


If an incorrect ESN is bound during the license application stage and records about binding a correct ESN to the license exist on the ESDP system, you need to change the status of the license to which an incorrect ESN is bound from active to inactive.


Channel partners and final users do not have the permission for license rollback without a revocation code. If needed, contact Huawei technical support personnel. This section describes only procedures for rolling back a license with a revocation code.

You can run the display license revoke-ticket command in any view to obtain the license revocation code.


  • Roll back a license permanently.
    1. Log in to the ESDP system at
    2. Choose License Commissioning and Maintenance > Commercial License Rollback > Permanent License Rollback from the left navigation tree to enter the Permanent License Rollback page.
    3. On the Permanent License Rollback page, select Manual input for Revocation Code Input, enter the revocation code of the device, and click Verify

  • Roll back a fixed-term license.
    1. Log in to the ESDP system at
    2. Choose License Commissioning and Maintenance > Commercial License Rollback > Fix-term License Rollback to enter the Fix-term License Rollback page.
    3. On the Fix-term License Rollback page, enter the revocation code generated for the commercial fixed-term LSN to be rolled back in the original license file, and click Verify.


      The function of rolling back a fixed-term license is available on January 21, 2017. Only fixed-term licenses that are activated after January 21, 2017 can be rolled back, and commercial fixed-term licenses can be rolled back only in their validity periods.

Follow-up Procedure

For details about how to re-activate a license using a correct ESN and authorization code, see Obtaining COMM Licenses for New Site Projects.

Updated: 2019-04-30

Document ID: EDOC1100015347

Views: 12467

Downloads: 197

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next