No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

License Usage Guide

HUAWEI USG6000, USG9500, NGFW Module

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Should I Do If the State of a Commercial License Changes Because the Chassis Is Replaced or an Incorrect ESN Is Used to Apply for the License?

What Should I Do If the State of a Commercial License Changes Because the Chassis Is Replaced or an Incorrect ESN Is Used to Apply for the License?

Run the display esn command to check the ESN of the local device, and run the display license verbose command to check the ESN used to apply for the license (displayed in the License file ESN field). If the two ESNs are different, the license is in Trial state (you can check the license state using the display license command). Apply for and load a new license before the expiration date of the Trial state.

NOTE:

If the license you want to load next time is a Demo license or a commercial license of which the ESN is different from the device's ESN, the license cannot be loaded. You can only load a commercial license of which the ESN is the same as the device's ESN.

Translation
Download
Updated: 2019-04-30

Document ID: EDOC1100015347

Views: 12426

Downloads: 195

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next