No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


License Usage Guide

HUAWEI USG6000, USG9500, NGFW Module

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Obtaining COMM Licenses for Capacity Expansion Projects

Obtaining COMM Licenses for Capacity Expansion Projects


  • The entitlement ID (LAC) and capacity expansion contract ID have been obtained.
  • The device ESNs have been obtained.
  • The product name and ESN in the contract are the same as those on the live network.
  • The entitlement in Ready state is available for the device that requires capacity expansion.


For capacity expansion projects, the license management system automatically combines the licenses on the same device to generate a new license file. The version of product with capacity expanded must be the same as or later than the version of current product.


  1. Log in to the ESDP system at
  2. Verify that the capacity expansion conditions are met.

    1. Click Equipment(Node) Management in the navigation tree on the left.
    2. On the Equipment(Node) Management page, enter the ESN of a specified device and click Search to verify that authorization information about this device exists in the ESDP system and the ESN of the device is correct.

    3. Verify the delivery status of the license in the search result.
      • If the status is Activated, roll back the license status to Ready by referring to Rolling Back a License and continue with Step 3.
      • If the status is Ready, go to Step 3.
      • If any other status is displayed, contact Huawei technical support personnel.

  3. For subsequent operations, see Obtaining COMM Licenses for New Site Projects.
Updated: 2019-04-30

Document ID: EDOC1100015347

Views: 12609

Downloads: 199

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next