No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(50KTL, 60KTL, 65KTL)-M0 User Manual

This document describes the SUN2000-50KTL-M0, SUN2000-60KTL-M0 and SUN2000-65KTL-M0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading

Upgrading

Procedure

  1. Obtain the software upgrade package from the technical support website.
  2. Decompress the upgrade package.

    • When the login password of the SUN2000 app is the initial password (00000a), there is no need to perform 35.
    • When the login password of the SUN2000 app is not the initial password, perform 37.

  3. On the SUN2000 app, choose Tool Kit > Local maint script > Inverter Command Settings to generate an upgrade boot script file (boot script file for short).
  4. Import the boot script file to a PC.
  5. Replace the boot script file in the upgrade package (sun_lmt_mgr_cmd.emap) with the one generated by the SUN2000 app.
  6. Copy the extracted files to the root directory of the USB flash drive.
  7. Connect the USB flash drive to the USB port. The system automatically identifies the USB flash drive and executes all commands specified in the boot script file. View the LED indicator to determine the operating status.

    Verify that the ciphertext in the boot script file matches the login password of the SUN2000 app. If they do not match and you insert the USB flash drive for five consecutive times, the user account will be locked for 10 minutes.
    Table 7-4 LED indicator description

    LED Indicator

    Status

    Meaning

    Green off

    There is no operation with a USB flash drive.

    Blinking green at long intervals (on for 1s and then off for 1s)

    There is an operation with a USB flash drive.

    Blinking green at short intervals (on for 0.125s and then off for 0.125s)

    An operation with a USB flash drive has failed.

    Steady green

    An operation with a USB flash drive is successful.

  8. (Optional) The system automatically restarts when the upgrade is completed. All LED indicators are off during the restart. After the restart, the preceding indicator is blinking green slowly (on for 1s and then off for 1s) for 1 minute until becoming steady on, which indicates that the upgrade is successful.

    NOTE:

    The SUN2000 can also be locally upgraded through the Inverter Upgrade on the SUN2000 app. For details, see the SUN2000 APP User Manual.

Updated: 2019-10-12

Document ID: EDOC1100016052

Views: 7966

Downloads: 2284

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next