No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(50KTL, 60KTL, 65KTL)-M0 User Manual

This document describes the SUN2000-50KTL-M0, SUN2000-60KTL-M0 and SUN2000-65KTL-M0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The following requirements should be met when the SUN2000 needs to be stored prior to installation:

  • Put the SUN2000 in the original package. Keep the desiccant and seal it using the adhesive tape.
  • Keep the proper storage temperature and humidity.

  • The SUN2000 should be stored in a clean and dry place and be protected from dust and water vapor corrosion.
  • The number of stacked SUN2000s should meet requirements.

  • Regular inspection is required during the storage. Replace the packing materials when necessary.
  • After long-term storage, an inspection and test conducted by qualified persons are necessary before the SUN2000 is put into use.
Updated: 2019-10-12

Document ID: EDOC1100016052

Views: 8055

Downloads: 2295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next