No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(50KTL, 60KTL, 65KTL)-M0 User Manual

This document describes the SUN2000-50KTL-M0, SUN2000-60KTL-M0 and SUN2000-65KTL-M0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enclosure Labels

Enclosure Labels

Label

Name

Meaning

Running warning

Potential hazards exist after the SUN2000 is powered on. Take protective measures when operating the SUN2000.

Burn warning

Do not touch a running SUN2000 because it generates high temperatures on the shell.

Delay discharge

  • High voltage exists after the SUN2000 is powered on. Only certified electricians are allowed to perform operations on the SUN2000.
  • Residual voltage exists after the SUN2000 is powered off. It takes 15 minutes for the SUN2000 to discharge to the safe voltage.

Refer to documentation

Reminds operators to refer to the documents provided with the SUN2000.

Grounding

Indicates the position for connecting the PE cable.

Operation warning

Do not remove the DC input connector when the SUN2000 is running.

DC terminal operation warning

High voltage exists after the SUN2000 is powered on. To avoid electric shocks, perform the following system power-off operations before plugging or unplugging DC input connectors of the SUN2000:

  1. Send a shutdown command.
  2. Turn off the downstream AC switch.
  3. Turn off the two DC switches at the bottom.

SUN2000 serial number (SN) label

Indicates the SUN2000 SN.

Weight label

The SUN2000 needs to be carried by four people or using a pallet truck.

Updated: 2019-10-12

Document ID: EDOC1100016052

Views: 7823

Downloads: 2261

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next