No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(50KTL, 60KTL, 65KTL)-M0 User Manual

This document describes the SUN2000-50KTL-M0, SUN2000-60KTL-M0 and SUN2000-65KTL-M0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operations with the SUN2000 App

Operations with the SUN2000 App

  • When you use the SUN2000 app to set parameters for the SUN2000, setting items on certain parameter setting screens are not displayed if the AC switch between the SUN2000 and the power grid is turned on but both of DC SWITCH on the SUN2000 are not in the ON position. Switch both of DC SWITCH to the ON position and then reset relevant parameters again.
  • If you change the grid code, some parameters may be restored to factory defaults. After the grid code is changed, check whether the previously set parameters are affected.
  • The app screenshots in this chapter are for the SUN2000-60KTL-M0.
  • Configurable parameters vary depending on the grid code. The actual display prevails.
  • The parameter names, value ranges, and default values are subject to change. The actual display prevails.
Updated: 2019-10-12

Document ID: EDOC1100016052

Views: 7742

Downloads: 2248

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next