No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(50KTL, 60KTL, 65KTL)-M0 User Manual

This document describes the SUN2000-50KTL-M0, SUN2000-60KTL-M0 and SUN2000-65KTL-M0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Tools

Tools

Type

Tool

Installation tools

Hammer drill

Drill bit: Φ14 mm and Φ16 mm

Socket wrench

Torque wrench

Torque screwdriver (Phillips head: M4; flat head: M4)

Diagonal pliers

Wire stripper

Flat-head screwdriver

Head: 0.6 mm x 3.5 mm

Rubber mallet

Utility knife

Cable cutter

Crimping tool

Model: UTXTC0005 or H4TC0003; manufacturer: Amphenol

RJ45 crimping tool

Removal wrench

Model: H4TW0001; manufacturer: Amphenol

Vacuum cleaner

Multimeter

DC voltage measurement range ≥ 1100 V DC

Marker

Measuring tape

Digital or bubble level

Hydraulic pliers

Heat shrink tubing

Heat gun

Cable tie

N/A

N/A

PPE

Safety gloves

Safety goggles

Anti-dust respirator

Safety shoes

NOTE:

UTXTC0005 is used to crimp metal cold forming contacts, while H4TC0003 is used to crimp metal stamping forming contacts.

Updated: 2019-10-12

Document ID: EDOC1100016052

Views: 8066

Downloads: 2295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next