No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Agile POL Solution Configuration Guide 02

This document describes the service configuration guide for Huawei Agile POL solution, including enterprise campus, hotel, and campus scenarios. Service configuration cases include data, IP phone, Wi-Fi, VoD, and video surveillance.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Wi-Fi Access Service

Configuring the Wi-Fi Access Service

The OLT is connected to the remote ONT through a GPON port, ONT provides Wi-Fi services to users through the ont Wi-Fi feature.

Prerequisites

  • The ONT has been added to the OLT.
  • The Web page for configuring ONT varies with ONT versions, but the parameter configuration is the same. For details, see relevant ONT manuals.

Data Plan

Table 4-5  Data Plan

Item

Data

Traffic profile

WiFi service traffic profile:
  • profile name: traffic_table_wifi
  • CIR: off
  • priority: 0

ONT line profile

Profile name: pol_line_all

GEM port ID: 18

Networking data

Uplink port: 0/2/0

PON access port: 0/1/0

ONU ID: 1

VLAN Planning

Single VLAN tag
  • S-VLAN ID: 1001
  • C-VLAN ID: 1001
  • VLAN type: smart
  • VLAN attribute: common
NOTE:

If the Wi-Fi service S-VLAN multiplexing Internet service S-VLAN, then the Wi-Fi service can reuse the Internet service data planning, including VLAN, Gem Port, QoS.

Procedure

  1. Configure the OLT.
    1. Configure a traffic profile.

      Run the display traffic table ip command to query existing traffic profiles in the system. If the traffic profiles existing in the system do not meet the requirements, you need to run the traffic table ip command to add a traffic profile.

      Set the profile name to traffic_table_wifi, the CIR to off, and the priority to 0. Packets are scheduled according to the priority specified in the profile.

      huawei(config)#traffic table ip name traffic_table_wifi cir off priority 0 priority-policy local-setting

    2. Configure the mapping between a GEM port and a VLAN.

      The service flow of user VLAN 1001 is mapped to GEM port with index 18, respectively in the ONT line profile.

      huawei(config)#ont-lineprofile gpon profile-name pol_line_all 
      huawei(config-gpon-lineprofile-1)#gem mapping 18 1 vlan 1001
      huawei(config-gpon-lineprofile-1)#commit 
      huawei(config-gpon-lineprofile-1)#quit

    3. Create a service VLAN and add an uplink port to it.

      Add upstream port 0/2/0 to VLAN 1001.

      huawei(config)#vlan 1001 smart
      huawei(config)#vlan attrib 1001 common
      huawei(config)#port vlan 1001 0/2 0

    4. Create service flow.

      Create service flow, set the service VLAN to 1001, GEM port ID to 18, and user VLAN to 1001, and use traffic profile traffic_table_wifi.

      huawei(config)#service-port vlan 1001 gpon 0/1/0 ont 1 gemport 18 multi-service user-vlan 1001 tag-transform 
      translate inbound traffic-table name traffic_table_wifi outbound traffic-table name traffic_table_wifi

    5. Save the data.

      huawei(config)#save

  2. Configure the ONT on the Web page.
    1. Log in to the Web configuration page.

      1. Configure the IP address of the PC network adapter to be in the same network segment with the IP address of the local maintenance Ethernet port on the ONT.
      2. Open the Web browser, and enter the IP address (https with high priority is recommended) of the local maintenance Ethernet port on the ONT. In the login window that is displayed, enter the user name and password of the administrator. After the password is authenticated, the web configuration window is displayed.

    2. Configure the Wi-Fi parameters.



    3. Configure the parameters of the Layer 3 route WAN port.



    4. Check the ONT connection status.



Result

SSID radio signals can be searched on the Wi-Fi terminal. After the user enter the authentication key and pass the authentication, the Wi-Fi terminal can obtain the IP address allocated by the DHCP IP address pool on the ONT. After the PPPoE dialup is successfully performed on the ONT, the user can access the Internet.

Configuration Script

traffic table ip name traffic_table_wifi cir off priority 0 priority-policy local-setting
ont-lineprofile gpon profile-name pol_line_all 
gem mapping 18 1 vlan 1001
commit 
quit
vlan 1001 smart
vlan attrib 1001 common
port vlan 1001 0/2 0
service-port vlan 1001 gpon 0/1/0 ont 1 gemport 18 multi-service user-vlan 1001 tag-transform translate inbound traffic-table name traffic_table_wifi outbound traffic-table name traffic_table_wifi
save
Translation
Download
Updated: 2018-10-22

Document ID: EDOC1100016413

Views: 62499

Downloads: 392

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next