No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C20 Block Storage Service Software Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Number of VBS Processes

Configuring the Number of VBS Processes

Scenarios

By default, one VBS process is deployed on each compute node. In database scenarios, IB or RoCE networking places high requirements on compute node performance. One VBS process may not meet service requirements. You are advised to deploy multiple VBS processes based on service requirements and resources.

Prerequisites

Conditions

You have obtained the management IP address of the primary FSM node and the password of user dsware.

Procedure

    1. Use PuTTY to log in to the primary FSM node.

      Log in to the primary FSM node using the FSM management node IP address as user dsware.

      If the public and private keys are used to authenticate the login, perform the operations based on Using PuTTY to Log In to a Node in Key Pair Authentication Mode.

    2. Run the vim /opt/omm/oms/workspace0/webapps/dsware/WEB-INF/SystemConfiguration.xml command to change the value of g_vbs_per_server.

      The following is an example of changing the parameter value to 2:

      <g_vbs_per_server type="initial" range="[1:10]" desc=" vbs process number in one server">2</g_vbs_per_server>

      The value is the number of VBS processes installed on a single compute node. The value ranges from 1 to 10. The minimum number of VBS processes is 2. If the system resources are sufficient, four VBS processes are recommended.

      The number of VBS processes to be deployed on each compute node must be evaluated based on the resources that can be provided by compute nodes for the VBS and the performance requirements of users on compute nodes. For details about the VBS process resource requirements, see compute node requirements in section CPU and Memory in System Requirements.

    3. Run the su - omm -c restart_tomcat command to restart tomcat.
Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100016637

Views: 24012

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next