No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage V100R006C20 Block Storage Service Software Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Storage Resources

Adding Storage Resources


  • You have configured the storage and management networks of compute nodes.
  • You have installed drivers and tools for compute nodes as instructed in section Installing Drivers and RAID CLI Tools of Installing Drivers and Tools in this scenario.
  • You have installed FSA on compute nodes as instructed in section Installing FSA in this scenario.
  • You have created block storage clients for compute nodes as instructed in section Configuring FusionStorage Block in this scenario.


Add FusionStorage Block to FusionCompute.

For details, see Adding Storage Resources to a Site, Associating Storage Resources with a Host, and Scanning Storage Devices in the FusionSphere Virtualization (FusionCompute) product documentation.

If the FusionStorage Manager (FSM) node is equipped with dual planes, the added management IP address must be the internal IP address of the FSM node.

Updated: 2019-06-29

Document ID: EDOC1100016637

Views: 29950

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next