No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C20 Block Storage Service Software Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing FSA

Installing FSA

Scenarios

Add servers to FusionStorage Block and install the FusionStorage Agent (FSA) nodes on the FusionStorage Block Self-Maintenance Platform. All FusionStorage Block storage nodes and computing nodes that use the FusionStorage Block storage resources must be deployed with the FSA process.

Prerequisites

Conditions

You have obtained the management plane IP address of each server.

Data

Data preparation is not required for this operation.

Procedure

    Add servers to FusionStorage Block.

    1. Log in to the FusionStorage Block Self-Maintenance Platform. For details, see Logging In to the FusionStorage Block Self-Maintenance Platform.

      The default administrator username and password for logging in to the FusionStorage Block Self-Maintenance Platform are admin and IaaS@PORTAL-CLOUD8!, respectively.

      Change the login password after your first login.

    2. On the FusionStorage Block Self-Maintenance Platform, choose Hardware > Servers.

      The Servers page is displayed.

      NOTE:
      When you first log in to the web client, an information dialog box is displayed to help you quickly navigate to the Servers page.

    3. Select the mode for adding servers.

      • To add servers one by one, go to 9.
      • To add servers in batches, go to 4.

    4. Click Batch Add.

      The Batch Add page is displayed.

    5. Click Download Template and save the template to a local directory.
    6. Open the template file and fill the file with the information about all servers to be added.

      Information about the CVM and all storage nodes deployed in separation mode must be imported to FusionStorage Block.

      The information includes:

      • Management IP Address: Enter the server management IP address. This IP address is used for the communication with FSM nodes, and FSM nodes manage servers using it. This IP address is not the server BMC IP address.
      • Hardware Model: Select a model from the drop-down list or customize a model.
      • Cabinet: Enter the position of the server in the equipment room.
      • Subrack: Enter the position of the server in the cabinet.
      • Slot Number: Enter the position of the server in the subrack.
      After setting these parameters for all the servers, save the template file.

    7. On the Batch Add page, click on the left of Upload, select the configured template file, and click Upload.

      After the template file is successfully imported, the newly added servers are listed on the Servers page.

    8. Go to 13.
    9. Click Single Add.

      The Single Add dialog box is displayed, as shown in Figure 7-42.

      Figure 7-42  Single Add dialog box

    10. Select a server type and set the following parameters:

      Information about the CVM and all storage nodes deployed in separation mode must be imported to FusionStorage Block.

      The information includes:

      • Management IP Address: Enter the server management IP address. This IP address is used for the communication with FSM nodes, and FSM nodes manage servers using it. This IP address is not the server BMC IP address.
      • Hardware Model: Select a model from the drop-down list or customize a model.
      • Cabinet: Enter the position of the server in the equipment room.
      • Subrack: Enter the position of the server in the cabinet.
      • Slot Number: Enter the position of the server in the subrack.

    11. Click OK.

      The newly added servers are listed on the Servers page.

    12. Add information about all servers. For details, see 9 to 11.

      Information about the CVM and all storage nodes deployed in separation mode must be imported to FusionStorage Block.

    Install FSA nodes on the servers.

    1. On the FusionStorage Block Self-Maintenance Platform, choose Hardware > Servers.

      The Servers page is displayed.

    2. Click Install FSA in the right pane.

      A dialog box is displayed.

    3. On the Select Software Package page, click Select.

      A dialog box is displayed.

    4. Select DSwareAgent.tar.gz.
    5. Click Add.

      The selected software packages are displayed on the Select Software Package page.

    6. Click Next.

      The Select Server page is displayed.

    7. Click Add.

      The Add Server page is displayed.

    8. Select all servers in the list and click Add.

      All servers on which the FSA software is to be installed are listed on the Add Server page.

    9. Click Next.

      The Configure Login Parameters page is displayed.

    10. In the Configure Login Parameters area, set server parameters.

      Select the required authentication mode and set the following authentication parameters:

      • Password-based authentication
        • Server Login Username: Set this parameter to the username that can log in to the server using SSH. If you can log in to the server as user root, enter root.
        • Password: Set this parameter to the password of the login user.
        • Root password: Set this parameter to the password of user root.
      • Public key-based authentication

        If the public key-based authentication is used to install FSA, you need to obtain the private key file and the private key password of to-be-installed nodes before the installation.

        • Server Login Username: Set this parameter to the username that can log in to the server using SSH. If you can log in to the server as user root, enter root.
        • Private Key File Directory: Set this parameter to the /home/omm/.ssh/Name of the private key file directory that stores the private key file on both active and standby FSM nodes.
          NOTE:
          1. Use WinSCP to upload the private key file to the /home/dsware directory on both active and standby FSM nodes as user dsware.
          2. Use PuTTY to log in to both active and standby FSM nodes as user dsware, switch to user root, and run the following commands to copy the private key file, for example id_rsa, to the specified directory and modify the user group rights:
            • mkdir -p /home/omm/.ssh
            • cp /home/dsware/id_rsa /home/omm/.ssh
            • chown omm:omm /home/omm/.ssh
            • chown omm:omm /home/omm/.ssh/id_rsa
            • chmod 600 /home/omm/.ssh/id_rsa

          If the public and private keys are used to authenticate the login, perform the operations based on Using PuTTY to Log In to a Node in Key Pair Authentication Mode.

        • Private Key Password: Set a password for the private key file.
        • Root password: Set this parameter to the password of user root for the FSA node.

    11. Click Install.

      The system starts to install the FusionStorage Block agent software. The entire installation process takes about 5 minutes.

    12. Close the Install FSA page to switch to the Servers page.
Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100016637

Views: 26799

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next