No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C20 Block Storage Service Software Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring FSM

Configuring FSM

Scenarios

Install the FusionStorage Manager (FSM) VM in FusionSphere OpenStack on the web UI.

Prerequisites

Conditions

You have installed and configured FusionSphere OpenStack.

Data

Data preparation is not required for this operation.

Software

You have obtained the FusionStorage Block V100R006C20SPC200_UVP.tar.gz software package.

Procedure

    1. Log in to the FusionSphere OpenStack web client over the External API network.

      The login address is in the format of https://Reverse proxy IPv4 address of FusionSphere OpenStack:8890, for example, https://192.168.211.90:8890.

      The default username is admin. The default password is FusionSphere123.

    2. Choose Cloud Service > FusionStorage.Figure 5-44 shows the page for choosing these items.

      Figure 5-44  FusionStorage page

    3. Click Upload and select the FusionStorage Block software package, for example, FusionStorage Block V100R006C20SPC200_UVP.tar.gz, stored in the local directory.

      Confirm the upload operation. The software package is successfully uploaded once the upload progress reaches 100%.

    4. In the Virtual Machine List area, click Create.

      The page for creating a VM is displayed. Figure 5-45 shows the page for creating a VM.

      Figure 5-45  Creating a VM

    5. Enter the parameters of the FSM VM to be created.

      • Basic configurations:
        • HA Mode: Select the standalone or active/standby mode.
        • System Scale: Select the scale of servers managed by FusionStorage Block. When the system contains more than 64 servers, use independent physical disks as the FSM VM disks.
        • CPU Binding: Configure whether to bind VM vCPUs to physical server CPUs. If FSM and FusionSphere OpenStack OM are deployed on the same server, the value of CPU Binding must be consistent with that of FusionSphere OpenStack OM.
        • Network Planes: Select Single-Plane.

      • Configure OM Network: Set the floating IP address for the FSM external network.

        If an External OM network has been deployed, preferably use the External OM network as the FSM external network. If the External OM network is not deployed, use the External API network as the external network.

      • Hosts: Select the hosts on which the FSM VM is to be deployed based on the deployment plan of the FusionSphere solution.

    6. Click Create VM.

      The VM creation process takes about 20 minutes. If the VM is successfully created, it will be displayed in the VM list at the lower part of the page.

      The login URL of the FusionStorage Block Self-Maintenance Platform is also displayed in the VM list, for example, https://External network plan floating IPv4 address:28443/fsportal,.

      The default administrator username and password for logging in to the FusionStorage Block Self-Maintenance Platform are admin and IaaS@PORTAL-CLOUD8!, respectively.

    1. Install UVP VMTools

      UVP VMTools needs to be installed on FSM VMs after FSM VMs are installed so that the I/O processing performance can be improved and hardware of the VMs can be monitored. For details, see Installing UVP VMTools.

      NOTE:
      FSM VMs restart during the installation of UVP VMTools. This causes service interruption. Therefore, you must install UVP VMTools immediately after active and standby FSM VMs are installed.

    (Optional) Install the LFTP software.

    Perform this step if the FSM node will use a third-party backup server.

    1. Copy lftp-xxx.rpm in the lftp folder of the FusionStorage Block V100R006C20SPC200_tool.zip software package to the home directory on the first server with the FSM node deployed.
    2. Use PuTTY to log in to the first server with the FSM node installed.

      Ensure that the management IP address and username root are used to establish the connection.

      If the public and private keys are used to authenticate the login, perform the operations based on Using PuTTY to Log In to a Node in Key Pair Authentication Mode.

    3. Run the following command to install the LFTP software:

      rpm -ivh lftp-4.3.7-37.1.x86_64.rpm

    4. If FSM nodes are deployed working in active/standby mode, repeat 8 to 10 to install the LFTP software on the second server with the FSM node deployed.

    (Optional) Modify the FSM network.

    After FSM nodes are installed, if FusionSphere OpenStack has modified the External OM network, modify the FSM network. For details, see Modifying the FSM Network.

Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100016637

Views: 29103

Downloads: 19

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next