No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C20 Block Storage Service Software Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing FSA

Installing FSA

Scenarios

Add servers to FusionStorage Block and install the FusionStorage Agent (FSA) nodes on the FusionStorage Block Self-Maintenance Platform. All FusionStorage Block storage nodes and computing nodes that use the FusionStorage Block storage resources must be deployed with the FSA process.

FusionStorage Agent (FSA) needs to be installed on all FusionSphere OpenStack nodes with the blockstorage role assigned.

Prerequisites

Conditions

You have obtained the management IP addresses of all servers.

Data

Data preparation is not required for this operation.

Procedure

    Add servers to FusionStorage Block.

    If the eBackup server is to be added to FusionStorage Block, install the OS dependency packages before adding the server. For details, see Install OS dependency packages in section Installing Drivers and Tools.

    1. Log in to the FusionStorage Block Self-Maintenance Platform. For details, see Logging In to the FusionStorage Block Self-Maintenance Platform.

      The default administrator username and password for logging in to the FusionStorage Block Self-Maintenance Platform are admin and IaaS@PORTAL-CLOUD8!, respectively.

      Change the default login password upon your first login.

    2. Choose Hardware > Servers on the FusionStorage web client.

      The Servers page is displayed.

      NOTE:
      An information dialog box is displayed for the first login to help users conveniently navigate to the Servers page and perform operations on the page.

    3. Select the mode for adding servers.

      • To add servers one by one, go to 9.
      • To add servers in batches, go to 4.

    4. Click Batch Add.

      The Batch Add page is displayed.

    5. Click Download Template and save the template to a local directory.
    6. Open the template file and fill the file with the information about all servers to be added.

      The information includes:

      • Management IP Address: Enter the server management IP address. This IP address is used for the communication with FSM nodes, and FSM nodes manage servers using it. This IP address is not the server BMC IP address.
      • Hardware Model: Select a model from the drop-down list or customize a model.
      • Cabinet: Enter the position of the server in the equipment room.
      • Subrack: Enter the position of the server in the cabinet.
      • Slot Number: Enter the position of the server in the subrack.
      After setting these parameters, save the template file.

    7. On the Batch Add page, click to the left of Upload, select the configured template file, and click Upload.

      After the template file is successfully imported, the newly added servers are listed on the Servers page.

    8. Go to 13.
    9. Click Single Add.

      The Single Add dialog box is displayed, as shown in Figure 5-48.

      Figure 5-48  Single Add dialog box

    10. Select a server type and set the following parameters:

      • Management IP Address: Enter the server management IP address. This IP address is used for the communication with FSM nodes, and FSM nodes manage servers using it. This IP address is not the server BMC IP address.
      • Hardware Model: Select a model from the drop-down list or customize a model.
      • Cabinet: Enter the position of the server in the equipment room.
      • Subrack: Enter the position of the server in the cabinet.
      • Slot Number: Enter the position of the server in the subrack.

    11. Click OK.

      The newly added server is listed on the Servers page.

    12. Add information about all the other servers. For details, see 9 to 11.

    Install the FSA nodes on the servers.

    1. On the FusionStorage Block Self-Maintenance Platform, choose Hardware > Servers.

      The Servers page is displayed.

    2. Click Install FSA in the right pane.

      A dialog box is displayed.

    3. On the Select Software Package page, click Select.

      A dialog box is displayed.

    4. Select DSwareAgent.tar.gz.
    5. Click Add.

      The selected software package is displayed on the Select Software Package page.

    6. Click Next.

      The Select Server page is displayed.

    7. Click Select.

      The Add Server page is displayed.

    8. Select servers in the list and click Add.

      The servers on which the FSA software is to be installed are listed on the Select Server page.

      You are required to configure the login password when installing an FSA node. In separated deployment mode, the login passwords for computing nodes and storage nodes are different. Therefore, you must select the servers with the same login password in this step.

    9. Click Next.

      The Configure Login Parameters page is displayed.

    10. In the Configure Login Parameters area, set server parameters.

      Select the required authentication mode and set the following authentication parameters:

      • Password-based authentication
        • Server Login Username:

          In a converged deployment, set this parameter to fsp.

          In a separated deployment, set this parameter to fsp for a computing node and to the username that is used to log in to the server for a storage node. If username root can be used to log in to the server, set this parameter to root.

          If the server is an eBackup server, set this parameter to hcp.

        • Password:

          In a converged deployment, set this parameter to the password of user fsp. For details about the default password, see the product documentation for the corresponding scenario.

          In a separated deployment, set this parameter to the password of user fsp for a computing node. For details about the default password, see the product documentation for the corresponding scenario. Set this parameter to the password of the user that is used to log in to the server for a storage node.

          If the server is an eBackup server, enter the password of user hcp.The default password of user hcp is Huawei@CLOUD8!.

        • Root password: Set this parameter to the password of user root.
      • Public key-based authentication

        If the public key-based authentication is used to install FSA, you need to obtain the private key file and the private key password of to-be-installed nodes before the installation.

        • Server Login Username:

          In a converged deployment, set this parameter to fsp.

          In a separated deployment, set this parameter to fsp for a computing node and to the username that is used to log in to the server for a storage node. If username root can be used to log in to the server, set this parameter to root.

          If the server is an eBackup server, set this parameter to hcp.

        • Private Key File Directory: Set this parameter to the /home/omm/.ssh/Name of the private key file directory that stores the private key file on both active and standby FSM nodes.
          NOTE:
          1. Use WinSCP to upload the private key file to the /home/dsware directory on both active and standby FSM nodes as user dsware.
          2. Use PuTTY to log in to both active and standby FSM nodes as user dsware, switch to user root, and run the following commands to copy the private key file, for example id_rsa, to the specified directory and modify the user group rights:
            • mkdir -p /home/omm/.ssh
            • cp /home/dsware/id_rsa /home/omm/.ssh
            • chown omm:omm /home/omm/.ssh
            • chown omm:omm /home/omm/.ssh/id_rsa
            • chmod 600 /home/omm/.ssh/id_rsa

            If the public and private keys are used to authenticate the login, perform the operations based on Using PuTTY to Log In to a Node in Key Pair Authentication Mode.

        • Private Key Password: Set a password for the private key file.
        • Root password: Set this parameter to the password of user root for the FSA node.

    11. Click Install.

      The FSA node installation begins, which takes about 5 minutes.

    12. Close the Install FSA page to switch to the Servers page.
Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100016637

Views: 27083

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next