No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage V100R006C20 Block Storage Service Software Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Mozilla Firefox Browser

Setting Mozilla Firefox Browser


Set Mozilla Firefox browser before logging in to the FusionStorage Block Self-Maintenance Platform the first time. After the setting, you can use Firefox browser to perform operations on the FusionStorage Block Self-Maintenance Platform.



  • The version of Mozilla Firefox browser used for logging in to the FusionStorage Block Self-Maintenance Platform is 26.0.
  • You have obtained the IP address of the FusionStorage Block.


Data preparation is not required for this operation.


    1. Open Mozilla Firefox.
    2. Choose Tools > Options.

      The Options dialog box is displayed.

    3. Choose Advanced > Update.
    4. Set the Firefox update policy to Check for updates, but let me choose whether to install them.

      FusionStorage Block Self-Maintenance Platform supports only official releases of Mozilla Firefox 26.0. Do no use other Mozilla Firefox versions.

    5. Click OK.
    6. Enter the FusionStorage Block Self-Maintenance Platform login address in the address box and press Enter.

      The address format is https://FusionStorage Block management node IPv4 address:28443/fsportal.

      For example, enter in the address box of Mozilla Firefox.

      FusionStorage Block Self-Maintenance Platform supports only the TLS 1.2 protocol. To use the protocol, enter about:config in the address bar of the browser, search for security.tls.version.max on the page that is displayed, double-click the parameter to set the parameter, and set the parameter to 3.

    7. Expand I Understand the Risks and click Add Exception.

      The Add Security Exception window is displayed.

    8. Verify that Permanently store this exception is selected and click Confirm Security Exception.

      Mozilla Firefox setting is complete.

Updated: 2019-06-29

Document ID: EDOC1100016637

Views: 26913

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next