No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C20 Block Storage Service Software Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing UVP VMTools

Installing UVP VMTools

Scenarios

UVP VMTools needs to be installed on an FSM VM after the FSM VM is installed so that the I/O processing performance can be improved and hardware of the VM can be monitored.

Impact on the System

UVP VMTools can take effect only after the FSM VM is restarted. Services of FSM suspend during the restart process.

Prerequisites

  • You have obtained the software package of UVP VMTools.

    The version of the UVP VMTools software package is consistent with the version of FusionSphere OpenStack.

    For example, if FusionStorage Block is deployed in FusionSphere OpenStack V100R006C10, the software package name is FusionSphere OpenStack V100R006C10_Tool.tar.gz, and you can obtain the uvp-vmtools-2.3.0-122.001.x86_64.rpm file after decompressing the software package.

    Path for downloading the software package is as follows:
    NOTE:
    • You must apply for a permission to obtain the software package from the website. Register with the website if this is your first time visiting http://support.huawei.com. For detailed operations, see the website Help and FAQs.
    • After obtaining the software package, you are advised to verify the software package by referring to the tool usage guide.
  • You have obtained the management IP addresses of the active and standby FSM nodes, the password of user dsware, and the password of user root.
  • PuTTY is available.
  • WinSCP is available.

Procedure

    1. Use WinSCP to log in to the active FusionStorage Manager (FSM) node as user dsware.

      Ensure that the management IP address of the active node and user dsware are used to establish the connection.

      The default password is IaaS@OS-CLOUD9!.

    2. Upload the uvp-vmtools-2.3.0-122.001.x86_64.rpm file to the /home/dsware directory on the active FSM node.

      NOTE:
      2.3.0-122.001.x86_64 indicates the version number of UVP VMTools. Obtain the required version number of UVP VMTools.

    3. Use PuTTY to log in to the active FSM node.

      Ensure that the management IP address of the active node and user dsware are used to establish the connection.

      The default password is IaaS@OS-CLOUD9!.

    4. Run the following command and enter the password of user root to switch to user root:

      su - root

      The default password of user dsware is IaaS@OS-CLOUD8!.

    5. Run the following command to switch to the directory containing UVP VMTools:

      cd /home/dsware

    6. Run the following command to decompress the uvp-vmtools-2.3.0-122.001.x86_64.rpm file:

      rpm2cpio uvp-vmtools-2.3.0-122.001.x86_64.rpm | cpio -imd

      NOTE:
      2.3.0-122.001.x86_64 indicates the version number of UVP VMTools. Obtain the required version number of UVP VMTools.

    7. Run the following command and copy the required image to the /opt directory:

      cp ./opt/patch/programfiles/vmtools/vmtools-linux.iso /opt

    8. Run the following command to switch to the /opt directory:

      cd /opt

    9. Run the following command to create a directory for mounting the image:

      mkdir vmtools

    10. Run the following command to mount the image in the vmtools directory:

      mount vmtools-linux.iso -o loop vmtools

    11. Run the following command to switch to the directory where the image is mounted:

      cd vmtools

    12. Run the following command to copy the files to the /opt directory:

      cp vmtools-2.3.0.122.tar.bz2 ../

      NOTE:
      2.3.0.122 indicates the version number of VMTools. Obtain the required version number of VMTools.

    13. Run the following command to switch to the /opt directory:

      cd /opt

    14. Run the following command to cancel the mounting of the image:

      umount vmtools-linux.iso

    15. Run the following command to decompress the file:

      tar -jxvf vmtools-2.3.0.122.tar.bz2

      NOTE:
      2.3.0.122 indicates the version number of VMTools. Obtain the required version number of VMTools.

    16. Run the following command to switch to the software package directory:

      cd vmtools

    17. Run the following command to install UVP VMTools:

      ./install

      If the following information is displayed, the installation is successful:
      Start Installation :
        Install kernel modules.
        Install UVP VMTools agent service.
        Change system configurations.
      Update kernel initrd image.
      The UVP VMTools is installed successfully.
      Reboot the system for the installation to take effect.
      

    18. Run the following command to restart the system to make the installation take effect:

      reboot

    19. Determine whether FSM is deployed in active/standby mode.

      • If yes, go to 20.
      • If no, no further action is required.

    20. Repeat 1 through 18 and log in to the standby node to install UVP VMTools.
Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100016637

Views: 23965

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next